TranslateLuminaires
2024-12-16
How to "Resume automation" after manually controlling a luminaire?
If you have manually controlled a luminaire, either via the Koolmesh app or via a Koolmesh enabled switch, and you wish the luminaries(s) back to the auto control (i.e. Schedule or Motion sensors). You can configure it by “How to quit manual override” in the Luminaires section, details please refer to page 44 of Koolemsh User Manual V2.2.
What would happen if I enabled the authoritative time of all devices in my network?
The last sensor you turned on will be the Authoritative time of your network, others will no longer be valid.
When I set the “Power on status” as “Recall this scene”,but the luminaires will turn off after the hold time,why can’t it stay in the scene?
In Koolmesh system,we need to use this feature together with another feature.We need to set in the motion sensor part,set the “Automatically send sensor signal when power is restored” as “Do not send”,otherwise when power is restored,the sensor will be triggered automatically.
